Amtecs 0.18kW 6 Pole Motor – 0.25HP 1000rpm IEC 71B34 Foot & C Face Motor
If you need a 0.18kW 6 pole 3 phase motor with IEC 71B34 mounting, this Amtecs unit is designed for dependable duty across conveyors, mixers, geared drives, and slower-running plant equipment. The aluminium construction helps keep handling practical while maintaining industrial durability.
Motor Overview
This version is supplied in Foot & C Face Motor format so it can be installed on installations that benefit from both face registration and foot support. This 6 pole configuration suits applications where a slower-running motor is preferred.
Why This Version?
This 0.18kW 6 pole Amtecs motor is intended for customers who need an IEC 71B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 105mm Spigot) make it easier to match to replacement and OEM requirements.
Typical Applications
- Replacement motor duties where IEC interchangeability matters
- OEM installations requiring a standard foot & c face motor motor
- Lower-speed industrial applications matched to 6 pole speed characteristics
- General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment
Technical Details
- Rated power: 0.18kW
- Pole count: 6 pole
- Nominal speed: 1000
- IEC mounting code: 71B34
- Mounting type: Foot & C Face Motor
- Shaft / flange detail: 14mm Shaft x 105mm Spigot
- Voltage: 380-420 / 220-240 V Y/Δ 50Hz
- Protection: IP55 TEFC
- Efficiency: IE2
- Construction: Aluminium frame, continuous-duty industrial motor
Internal Links & Compatible Options
Same motor power, different mounting options: jump to the Amtecs 0.18kW 6 Pole Motor mounting style you need.
Need a different motor power? Explore the closest motor sizes around 0.18kW.
More Amtecs motors: Browse all 0.18kW motors Browse all AMTECS electric motors
Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator
Frequently Asked Questions
What speed does a 6 pole motor run at?
A 6 pole electric motor operating on a 50Hz supply typically runs at around 1000rpm, with the actual full-load speed usually around 930–970rpm due to motor slip.
What is this 0.18kW motor commonly used for?
This motor is commonly used on small conveyors, fans, pumps, geared assemblies, packaging equipment, and compact OEM machinery where lower running speed, reliable continuous-duty operation, and IEC interchangeability are important.
Why would I choose a B34 motor?
A B34 foot and face mount motor is useful where both base support and a compact face-mounted connection are required on the same application.
What should I check before replacing a 0.18kW motor?
When replacing a 0.18kW motor, check the frame size, pole count, B34 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.
Can this motor run on an inverter drive?
Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.
What does B34 mounting mean?
B34 combines foot mounting with a B14 face mount, making it useful where both a base fixing and a face-mounted connection are needed.
Reviews
There are no reviews yet.