Amtecs 0.18kW 2 Pole Motor – 0.25HP 3000rpm IEC 63B3 Foot Mount

This Amtecs 0.18kW electric motor uses a 2 pole winding and IEC 63B3 mounting arrangement, making it a strong option for fans, blowers, saws, polishing equipment, and direct-drive machinery. It is designed for continuous industrial service with IE2 efficiency and IP55 protection.

---

Motor Overview

Its Foot Mount arrangement is intended for base-mounted machine beds and fabricated steel structures. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.18kW 2 pole Amtecs motor is intended for customers who need an IEC 63B3 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (11mm Shaft) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot mount motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.18kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 63B3
• Mounting type: Foot Mount
• Shaft / flange detail: 11mm Shaft
• Voltage: 380-420 / 220-240 V Y/Δ 50Hz
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 0.18kW 2 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 0.18kW.

More Amtecs motors: Browse all 0.18kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 2 pole motor run at?

A 2 pole electric motor operating on a 50Hz supply typically runs at around 3000rpm, with the actual full-load speed usually around 2800–2900rpm due to motor slip.

What is this 0.18kW motor commonly used for?

This motor is commonly used on small conveyors, fans, pumps, geared assemblies, packaging equipment, and compact OEM machinery where higher running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Is this motor suitable for pulley or coupling drives?

Yes, the B3 foot mount arrangement is commonly used for pulley-driven, chain-driven, and coupling-driven machinery where the motor is mounted directly onto a base or frame and aligned mechanically during installation.

What should I check before replacing a 0.18kW motor?

When replacing a 0.18kW motor, check the frame size, pole count, B3 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B3 mounting mean?

B3 is the standard IEC foot-mounted arrangement, designed for motors that bolt down to a machine bed, baseplate, skid, or fabricated frame.