Tec 0.55kW 6 Pole Motor – 0.75HP 1000rpm IEC 80B34 Foot & C Face Motor

Designed for conveyors, mixers, geared drives, and slower-running plant equipment, the Tec 0.55kW 6 pole motor in 80B34 format gives you a standard IEC solution for everyday industrial applications. The combination of aluminium construction, TEFC protection, and IE2 efficiency makes it ideal for replacement and OEM use.

---

Motor Overview

Because this product uses Foot & C Face Motor, it is especially well suited to installations that benefit from both face registration and foot support. This 6 pole configuration suits applications where a slower-running motor is preferred.

---

Why This Version?

This 0.55kW 6 pole Tec motor is intended for customers who need an IEC 80B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 120mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• Lower-speed industrial applications matched to 6 pole speed characteristics
• General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment

---

Technical Details

• Rated power: 0.55kW
• Pole count: 6 pole
• Nominal speed: 1000
• IEC mounting code: 80B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 19mm Shaft x 120mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.55kW 6 Pole Motor mounting style you need (80 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.55kW in the same pole and mounting style.

More Tec motors: Browse all 0.55kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

What kind of machinery is a 0.55kW 6 pole motor good for?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.55kW 6 pole IEC 80B34 motor is required.

What does an IEC 80B34 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Can this motor be used with a VFD or inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does IP55 mean on this motor?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

If you want the same motor in another mounting style, use the options below. If you need a nearby power size, the suggested alternatives keep the same pole count and mounting format.