Tec 0.37kW 8 Pole Motor – 0.5HP 750rpm IEC 90SB34 Foot & C Face Motor
For replacement motor duties and new machinery builds, this Tec 0.37kW 8 pole motor offers a practical IEC 90SB34 mounting solution with IP55 protection, TEFC construction, and IE2 efficiency.
Motor Overview
Because this product uses Foot & C Face Motor, it is especially well suited to installations that benefit from both face registration and foot support. This 8 pole configuration is suited to applications that need very low motor speed and smooth running.
Why This Version?
This 0.37kW 8 pole Tec motor is intended for customers who need an IEC 90SB34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (24mm Shaft x 140mm Spigot) make it easier to match to replacement and OEM requirements.
Typical Applications
- Replacement motor duties where IEC interchangeability matters
- OEM installations requiring a standard foot & c face motor motor
- Slow-speed industrial applications matched to 8 pole speed characteristics
- General 3 phase machinery including conveyors, indexing systems, slow-speed drive duties, and geared assemblies
Technical Details
- Rated power: 0.37kW
- Pole count: 8 pole
- Nominal speed: 750
- IEC mounting code: 90SB34
- Mounting type: Foot & C Face Motor
- Shaft / flange detail: 24mm Shaft x 140mm Spigot
- Voltage: 230/400V
- Protection: IP55 TEFC
- Efficiency: IE2
- Construction: Aluminium frame, continuous-duty industrial motor
Internal Links & Compatible Options
Same motor power, different mounting options: jump to the Tec 0.37kW 8 Pole Motor mounting style you need (90S Frame).
Need a different motor power? Explore the closest available motor sizes around 0.37kW in the same pole and mounting style.
More Tec motors: Browse all 0.37kW motors | Browse all TEC electric motors
Frequently Asked Questions
What applications suit a 0.37kW 8 pole motor?
This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.37kW 8 pole IEC 90SB34 motor is required.
What does an IEC 90SB34 motor mounting code refer to?
The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.
Will this motor work on an inverter drive?
Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.
How protected is an IP55 motor in normal industrial use?
IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.
The options below help you move to the same motor in a different mounting style or jump to nearby power sizes while keeping the same pole configuration and mounting type.
Reviews
There are no reviews yet.