Tec 0.18kW 8 Pole Motor – 0.25HP 750rpm IEC 80B35 Foot & Flange Motor

This Tec 0.18kW electric motor uses a 8 pole winding and IEC 80B35 mounting arrangement, making it a strong option for conveyors, indexing systems, slow-speed drive duties, and geared assemblies. It is designed for continuous industrial service with IE2 efficiency and IP55 protection.

---

Motor Overview

Because this product uses Foot & Flange Motor, it is especially well suited to applications where both flange location and foot support are useful. This 8 pole configuration is suited to applications that need very low motor speed and smooth running.

---

Why This Version?

This 0.18kW 8 pole Tec motor is intended for customers who need an IEC 80B35 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 200mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & flange motor motor
• Slow-speed industrial applications matched to 8 pole speed characteristics
• General 3 phase machinery including conveyors, indexing systems, slow-speed drive duties, and geared assemblies

---

Technical Details

• Rated power: 0.18kW
• Pole count: 8 pole
• Nominal speed: 750
• IEC mounting code: 80B35
• Mounting type: Foot & Flange Motor
• Shaft / flange detail: 19mm Shaft x 200mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.18kW 8 Pole Motor mounting style you need (80 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.18kW in the same pole and mounting style.

More Tec motors: Browse all 0.18kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.18kW 8 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.18kW 8 pole IEC 80B35 motor is required.

What does an IEC 80B35 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Will this motor work on an inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

If you want the same motor in another mounting style, use the options below. If you need a nearby power size, the suggested alternatives keep the same pole count and mounting format.