Tec 0.18kW 6 Pole Motor – 0.25HP 1000rpm IEC 71B14 Face Motor
If you need a 0.18kW 6 pole 3 phase motor with IEC 71B14 mounting, this Tec unit is designed for dependable duty across conveyors, mixers, geared drives, and slower-running plant equipment. The aluminium construction helps keep handling practical while maintaining industrial durability.
Motor Overview
Because this product uses Face Motor, it is especially well suited to compact gearbox inputs and machinery where face mounting saves space. This 6 pole configuration suits applications where a slower-running motor is preferred.
Why This Version?
This 0.18kW 6 pole Tec motor is intended for customers who need an IEC 71B14 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 105mm Spigot) make it easier to match to replacement and OEM requirements.
Typical Applications
- Replacement motor duties where IEC interchangeability matters
- OEM installations requiring a standard face motor motor
- Lower-speed industrial applications matched to 6 pole speed characteristics
- General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment
Technical Details
- Rated power: 0.18kW
- Pole count: 6 pole
- Nominal speed: 1000
- IEC mounting code: 71B14
- Mounting type: Face Motor
- Shaft / flange detail: 14mm Shaft x 105mm Spigot
- Voltage: 230/400V
- Protection: IP55 TEFC
- Efficiency: IE2
- Construction: Aluminium frame, continuous-duty industrial motor
Internal Links & Compatible Options
Same motor power, different mounting options: jump to the Tec 0.18kW 6 Pole Motor mounting style you need (71 Frame).
Need a different motor power? Explore the closest available motor sizes around 0.18kW in the same pole and mounting style.
More Tec motors: Browse all 0.18kW motors | Browse all TEC electric motors
Frequently Asked Questions
What kind of machinery is a 0.18kW 6 pole motor good for?
This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.18kW 6 pole IEC 71B14 motor is required.
How do I interpret the IEC 71B14 mounting designation?
The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.
Is this motor suitable for inverter drive use?
Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.
What does the IP55 rating tell me?
IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.
Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.
Reviews
There are no reviews yet.