Tec 0.12kW 6 Pole Motor – 0.16HP 1000rpm IEC 63B34 Foot & C Face Motor

This Tec 0.12kW electric motor uses a 6 pole winding and IEC 63B34 mounting arrangement, making it a strong option for conveyors, mixers, geared drives, and slower-running plant equipment. It is designed for continuous industrial service with IE2 efficiency and IP55 protection.

---

Motor Overview

Because this product uses Foot & C Face Motor, it is especially well suited to installations that benefit from both face registration and foot support. This 6 pole configuration suits applications where a slower-running motor is preferred.

---

Why This Version?

This 0.12kW 6 pole Tec motor is intended for customers who need an IEC 63B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (11mm Shaft x 95mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• Lower-speed industrial applications matched to 6 pole speed characteristics
• General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment

---

Technical Details

• Rated power: 0.12kW
• Pole count: 6 pole
• Nominal speed: 1000
• IEC mounting code: 63B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 11mm Shaft x 95mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.12kW 6 Pole Motor mounting style you need (63 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.12kW in the same pole and mounting style.

More Tec motors: Browse all 0.12kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.12kW 6 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.12kW 6 pole IEC 63B34 motor is required.

What does an IEC 63B34 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Will this motor work on an inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

The options below help you move to the same motor in a different mounting style or jump to nearby power sizes while keeping the same pole configuration and mounting type.