Amtecs 3kW 6 Pole Motor – 4HP 1000rpm IEC 132SB14 Face Motor

This Amtecs 3kW 6 pole three-phase electric motor is built in IEC 132SB14 format with B14 mounting, making it suitable for mixers, geared drives, agitators, feeders, and process machinery where slower running and smoother torque delivery are preferred. This version is aimed at users who need face motor, dependable IE3 efficiency, and IP55 protection for day-to-day industrial service.

---

Motor Overview

This version uses a B14 mounting arrangement for compact face-mounted installation. In practice, that makes it a practical choice for gearboxes, compact OEM builds, and machine inputs where space saving is important. The 6 pole winding gives a nominal speed of 1000rpm, so it is normally selected where reduced shaft speed is preferred without moving into very large frame sizes too quickly.

---

Why Choose This Configuration?

This exact model is best suited to buyers who specifically need an IEC 132SB14 motor in 3kW / 4HP. Compared with other mounting options in the same power and pole range, this version is intended for applications where a compact face-mount IEC motor is needed to suit tighter machine layouts, while still keeping the same core electrical performance and aluminium IE3 construction.

---

Technical Details

Rated power: 3kW
Pole count: 6 pole
Nominal speed: 1000
IEC mounting code: 132SB14
Mounting type: Face Motor
Shaft / flange detail: 38mm Shaft x 230mm Spigot
Voltage: 380-420 / 220-240 V Y/Δ 50Hz
Protection: IP55 TEFC
Efficiency: IE3
Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 3kW 6 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 3kW.

More Amtecs motors: Browse all 3kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 6 pole motor run at?

A 6 pole electric motor operating on a 50Hz supply typically runs at around 1000rpm, with the actual full-load speed usually around 930–970rpm due to motor slip.

What is this 3kW motor commonly used for?

This motor is commonly used on conveyors, pumps, fans, mixers, machine tools, gearboxes, and general industrial machinery where lower running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Is this motor suitable for compact direct mounting applications?

Yes, the B14 face mount arrangement is widely used where a compact flange fit is needed and space is more restricted than on full B5 flange-mounted applications.

What should I check before replacing a 3kW motor?

When replacing a 3kW motor, check the frame size, pole count, B14 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B14 mounting mean?

B14 is the IEC face-mounted arrangement, commonly used where a compact flange connection is needed on compatible gearboxes, pumps, and OEM machinery.