AmTecs 1.1kW 2 Pole IE3 Brake Motor – 1.5HP 3000rpm IEC 80B3 Foot Mount

AmTecs 1.1kW 2 pole IE3 brake motor with IEC 80 B3 b3 foot mount, aluminium construction, hand release, IP55 protection and a 110Vdc electromagnetic brake. This compact motor is ideal for conveyors, packaging machinery, geared drives, handling equipment and other industrial applications where controlled stopping and secure load holding are required.

---

Key Specifications

Power: 1.1kW (1.5HP)
Pole configuration: 2 Pole
Full-load speed: 2910rpm
Nominal speed: 3000rpm
Frame size: 80
Mounting: B3 Foot Mount
Voltage: 220/400V
Brake voltage: 110Vdc
Static braking torque: 8Nm
Brake response time: 0.25ms
Brake power: 26W
Efficiency at 100% load: 82.7%
Power factor: 0.83
Construction: Aluminium
Insulation class: F (temperature rise class B)
Protection: IP55

---

Mechanical Details

Shaft diameter: 19mm
Foot fixing centres (A/B): 125/100mm
Face register (M): Not applicable
Brake type: DC brake with half-wave rectifier and hand release
Standard finish: RAL 5010

---

Performance Data

Full-load torque: 3.61Nm
Starting current ratio: 7.6 x In
Starting torque ratio: 2.2 x Mn
Pull-out torque ratio: 2.3 x Mn
Sound pressure level: 65dB(A)

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the AmTecs 1.1kW 2 Pole Brake Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 1.1kW.

More Amtecs motors: Browse all 1.1kW motors Browse all brake motors

Helpful calculators: Gearbox Ratio & Speed Calculator | Output Torque Calculator

---

Frequently Asked Questions

What speed does this 2 pole brake motor run at?

A 2 pole electric motor on a 50Hz supply typically has a synchronous speed of 3000rpm, with the actual full-load speed usually slightly lower. This model runs at approximately 2910rpm under load.

What is this 1.1kW brake motor commonly used for?

This motor is commonly used on conveyors, packaging equipment, geared drives, handling systems and other machinery where controlled stopping and holding torque are needed in a compact IEC motor format.

What does B3 mounting mean?

B3 is a standard IEC motor mounting arrangement. This version is supplied as a B3 Foot Mount configuration to suit machinery requiring that fixing style.

What should I check before replacing a 1.1kW brake motor?

Before ordering, check the power rating, pole count, frame size, B3 Foot Mount, shaft dimensions, supply voltage and brake voltage so the replacement matches your existing motor and application.

Does this motor include a hand release?

Yes, this brake motor is fitted with a hand release, allowing manual brake release when needed during installation, maintenance or equipment adjustment.

Can this motor run on an inverter drive?

Many industrial brake motors can be used with inverter drives, but suitability depends on the application, duty cycle, switching frequency, brake control setup and cable length. It is best to confirm the exact operating conditions before use with a VFD.