Amtecs 3kW 6 Pole Motor – 4HP 1000rpm IEC 132SB34 Foot & C Face Motor

This Amtecs 3kW 6 pole three-phase electric motor is built in IEC 132SB34 format with B34 mounting, making it suitable for mixers, geared drives, agitators, feeders, and process machinery where slower running and smoother torque delivery are preferred. This version is aimed at users who need foot & c face motor, dependable IE3 efficiency, and IP55 protection for day-to-day industrial service.

---

Motor Overview

This version uses a B34 mounting arrangement for combined foot and face mounting flexibility. In practice, that makes it a practical choice for OEM machinery, reducers, and replacement assemblies where both feet and face location are useful. The 6 pole winding gives a nominal speed of 1000rpm, so it is normally selected where reduced shaft speed is preferred without moving into very large frame sizes too quickly.

---

Why Choose This Configuration?

This exact model is best suited to buyers who specifically need an IEC 132SB34 motor in 3kW / 4HP. Compared with other mounting options in the same power and pole range, this version is intended for applications where a combined foot and face IEC motor is needed for more installation flexibility, while still keeping the same core electrical performance and aluminium IE3 construction.

---

Technical Details

Rated power: 3kW
Pole count: 6 pole
Nominal speed: 1000
IEC mounting code: 132SB34
Mounting type: Foot & C Face Motor
Shaft / flange detail: Foot & C Face 38mm Shaft x 230mm Spigot
Voltage: 380-420 / 220-240 V Y/Δ 50Hz
Protection: IP55 TEFC
Efficiency: IE3
Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 3kW 6 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 3kW.

More Amtecs motors: Browse all 3kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 6 pole motor run at?

A 6 pole electric motor operating on a 50Hz supply typically runs at around 1000rpm, with the actual full-load speed usually around 930–970rpm due to motor slip.

What is this 3kW motor commonly used for?

This motor is commonly used on conveyors, pumps, fans, mixers, machine tools, gearboxes, and general industrial machinery where lower running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Why would I choose a B34 motor?

A B34 foot and face mount motor is useful where both base support and a compact face-mounted connection are required on the same application.

What should I check before replacing a 3kW motor?

When replacing a 3kW motor, check the frame size, pole count, B34 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B34 mounting mean?

B34 combines foot mounting with a B14 face mount, making it useful where both a base fixing and a face-mounted connection are needed.