Amtecs 0.55kW 2 Pole Motor – 0.75HP 3000rpm IEC 71B34 Foot & C Face Motor

Designed for fans, blowers, saws, polishing equipment, and direct-drive machinery, the Amtecs 0.55kW 2 pole motor in 71B34 format gives you a standard IEC solution for everyday industrial applications. The combination of aluminium construction, TEFC protection, and IE2 efficiency makes it ideal for replacement and OEM use.

---

Motor Overview

This version is supplied in Foot & C Face Motor format so it can be installed on installations that benefit from both face registration and foot support. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.55kW 2 pole Amtecs motor is intended for customers who need an IEC 71B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 105mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.55kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 71B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 14mm Shaft x 105mm Spigot
• Voltage: 380-420 / 220-240 V Y/Δ 50Hz
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 0.55kW 2 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 0.55kW.

More Amtecs motors: Browse all 0.55kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 2 pole motor run at?

A 2 pole electric motor operating on a 50Hz supply typically runs at around 3000rpm, with the actual full-load speed usually around 2800–2900rpm due to motor slip.

What is this 0.55kW motor commonly used for?

This motor is commonly used on small conveyors, fans, pumps, geared assemblies, packaging equipment, and compact OEM machinery where higher running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Why would I choose a B34 motor?

A B34 foot and face mount motor is useful where both base support and a compact face-mounted connection are required on the same application.

What should I check before replacing a 0.55kW motor?

When replacing a 0.55kW motor, check the frame size, pole count, B34 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B34 mounting mean?

B34 combines foot mounting with a B14 face mount, making it useful where both a base fixing and a face-mounted connection are needed.