Amtecs 0.25kW 2 Pole Motor – 0.33HP 3000rpm IEC 63B34 Foot & C Face Motor

The Amtecs 0.25kW 2 pole IE2 motor in IEC 63B34 format is built for industrial reliability where fans, blowers, saws, polishing equipment, and direct-drive machinery. This foot-and-face mounted aluminium motor combines standard IEC mounting dimensions with efficient 3 phase performance.

---

Motor Overview

The foot-and-face mounted design makes this motor suitable for installations that benefit from both face registration and foot support. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.25kW 2 pole Amtecs motor is intended for customers who need an IEC 63B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (11mm Shaft x 95mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.25kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 63B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 11mm Shaft x 95mm Spigot
• Voltage: 380-420 / 220-240 V Y/Δ 50Hz
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 0.25kW 2 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 0.25kW.

More Amtecs motors: Browse all 0.25kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 2 pole motor run at?

A 2 pole electric motor operating on a 50Hz supply typically runs at around 3000rpm, with the actual full-load speed usually around 2800–2900rpm due to motor slip.

What is this 0.25kW motor commonly used for?

This motor is commonly used on small conveyors, fans, pumps, geared assemblies, packaging equipment, and compact OEM machinery where higher running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Why would I choose a B34 motor?

A B34 foot and face mount motor is useful where both base support and a compact face-mounted connection are required on the same application.

What should I check before replacing a 0.25kW motor?

When replacing a 0.25kW motor, check the frame size, pole count, B34 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B34 mounting mean?

B34 combines foot mounting with a B14 face mount, making it useful where both a base fixing and a face-mounted connection are needed.