Tec 0.55kW 6 Pole Motor – 0.75HP 1000rpm IEC 80B35 Foot & Flange Motor

This Tec 0.55kW electric motor uses a 6 pole winding and IEC 80B35 mounting arrangement, making it a strong option for conveyors, mixers, geared drives, and slower-running plant equipment. It is designed for continuous industrial service with IE2 efficiency and IP55 protection.

---

Motor Overview

This version is supplied in Foot & Flange Motor format so it can be installed on applications where both flange location and foot support are useful. This 6 pole configuration suits applications where a slower-running motor is preferred.

---

Why This Version?

This 0.55kW 6 pole Tec motor is intended for customers who need an IEC 80B35 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 200mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & flange motor motor
• Lower-speed industrial applications matched to 6 pole speed characteristics
• General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment

---

Technical Details

• Rated power: 0.55kW
• Pole count: 6 pole
• Nominal speed: 1000
• IEC mounting code: 80B35
• Mounting type: Foot & Flange Motor
• Shaft / flange detail: 19mm Shaft x 200mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.55kW 6 Pole Motor mounting style you need (80 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.55kW in the same pole and mounting style.

More Tec motors: Browse all 0.55kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

What kind of machinery is a 0.55kW 6 pole motor good for?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.55kW 6 pole IEC 80B35 motor is required.

How do I interpret the IEC 80B35 mounting designation?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Will this motor work on an inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

How protected is an IP55 motor in normal industrial use?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

The options below help you move to the same motor in a different mounting style or jump to nearby power sizes while keeping the same pole configuration and mounting type.