Tec 0.18kW 8 Pole Motor – 0.25HP 750rpm IEC 80B14 Face Motor

For replacement motor duties and new machinery builds, this Tec 0.18kW 8 pole motor offers a practical IEC 80B14 mounting solution with IP55 protection, TEFC construction, and IE2 efficiency.

---

Motor Overview

Because this product uses Face Motor, it is especially well suited to compact gearbox inputs and machinery where face mounting saves space. This 8 pole configuration is suited to applications that need very low motor speed and smooth running.

---

Why This Version?

This 0.18kW 8 pole Tec motor is intended for customers who need an IEC 80B14 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 120mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard face motor motor
• Slow-speed industrial applications matched to 8 pole speed characteristics
• General 3 phase machinery including conveyors, indexing systems, slow-speed drive duties, and geared assemblies

---

Technical Details

• Rated power: 0.18kW
• Pole count: 8 pole
• Nominal speed: 750
• IEC mounting code: 80B14
• Mounting type: Face Motor
• Shaft / flange detail: 19mm Shaft x 120mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.18kW 8 Pole Motor mounting style you need (80 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.18kW in the same pole and mounting style.

More Tec motors: Browse all 0.18kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.18kW 8 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.18kW 8 pole IEC 80B14 motor is required.

What does the IEC 80B14 mounting arrangement mean?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Is this motor suitable for inverter drive use?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.