Tec 0.12kW 6 Pole Motor – 0.16HP 1000rpm IEC 63B5 Flange Motor

The Tec 0.12kW 6 pole IE2 motor in IEC 63B5 format is built for industrial reliability where conveyors, mixers, geared drives, and slower-running plant equipment. This flange-mounted aluminium motor combines standard IEC mounting dimensions with efficient 3 phase performance.

---

Motor Overview

This version is supplied in Flange Motor format so it can be installed on direct mounting to pumps, gearboxes, and flange-driven machinery. This 6 pole configuration suits applications where a slower-running motor is preferred.

---

Why This Version?

This 0.12kW 6 pole Tec motor is intended for customers who need an IEC 63B5 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (11mm Shaft x 140mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard flange motor motor
• Lower-speed industrial applications matched to 6 pole speed characteristics
• General 3 phase machinery including conveyors, mixers, geared drives, and slower-running plant equipment

---

Technical Details

• Rated power: 0.12kW
• Pole count: 6 pole
• Nominal speed: 1000
• IEC mounting code: 63B5
• Mounting type: Flange Motor
• Shaft / flange detail: 11mm Shaft x 140mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.12kW 6 Pole Motor mounting style you need (63 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.12kW in the same pole and mounting style.

More Tec motors: Browse all 0.12kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.12kW 6 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.12kW 6 pole IEC 63B5 motor is required.

What does an IEC 63B5 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Can this motor be used with a VFD or inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

How protected is an IP55 motor in normal industrial use?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.