Overview
Designed for larger IEC motor pairings, this BA72 bevel helical gearbox matches a 100-112B14 flange input with the standard 35mm hollow bore for compact but more capable right-angle drive assemblies.
Reduction profile: At 40.87:1, this high-reduction setup brings output speed down decisively while giving a clear step up in available torque for controlled, lower-speed drive duties.
The larger B14 input arrangement is useful where increased motor frame compatibility is needed without moving away from a relatively tidy installation footprint.
It is a practical fit for conveyors, packaging lines, indexing systems, and process machinery that benefit from stronger reduction without moving fully into ultra-slow output speeds.
That makes this build well suited to heavier-duty conveyors, process machinery, and OEM systems that need stronger reduction from a compact geared unit.
Need the non-standard 30mm bore option?
If your application requires the non-standard 30mm output bore instead of this standard 35mm version, we can supply that configuration as well. View available BA72 options and request the non-standard bore version here: Motovario BA72 Gearbox.
Key Specifications
Regulations: No
Bevel Helical: PAM B
Size: A72
Housing Version: U-Universal
Output Shaft Version: C-Hollow Shaft
Ratio (i): 40.87:1
Input Dim: Ø160×28 (IEC 100-112 B14)
Output Shaft Dim: Ø35
Rotation Direction: Standard
ON-Oil Plugs: No Plugs (Standard)
Mounting Position: U
ON-Output Oil Seal: NBR-Nitrile
ON-Input Oil Seal: NBR-Nitrile
ON-Output Bearings: Ball Bearings
ON-Lubrication: Mineral SAE 85W-140
Paint: Ral 5010 Blue
Designed to IEC mounting and interface standards, this gearbox offers straightforward compatibility with IEC frame motors and dependable performance in direct-on-line or VFD-controlled drive systems.
Output Speed (4-Pole vs 2-Pole Motors)
Calculated nominal output speed using a standard IEC motor:
| Motor Type | Input Speed (rpm) | Estimated Output Speed (rpm) |
|---|---|---|
| 4-Pole | 1400 | ~34 rpm |
| 2-Pole | 2800 | ~69 rpm |
Need torque confirmation? Output torque depends on motor power (kW), gearbox efficiency, and service factor. Use our Gearbox Service Factor Calculator or contact us for verified torque figures.
Motor Input Chart (IEC Flange Details)
This gearbox is supplied with a 100-112B14 IEC motor input. Confirm flange compatibility below:
| Motor Input | IEC Standard | Input Dimensions |
|---|---|---|
| 100-112B14 | IEC 60072 / IEC 60034 (B14 flange) | Ø160 × 28 |
If you’re unsure whether your motor is B5 or B14, contact our technical team for compatibility confirmation.
Internal Links & Compatible Options
Same ratio, different motor input: jump to the BA72 40.87:1 variant you need (35mm bore).
Need a different ratio? Explore the closest BA72 35mm ratios around this version.
More BA72 options: Browse all Motovario BA72 gearbox ratios
Explore the full BA Series range: Motovario BA Series bevel gearboxes
Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator
Ratio Selection Tips
Best for: heavier conveyors, process machinery, and industrial handling systems where slower shaft speed and stronger torque are needed.
Selection tip: choose 40.87:1 when medium ratios still feel too quick and the application needs a clearer step up in torque multiplication.
FAQ
Will this ratio be too slow for my application?
40.87:1 is firmly in the high reduction group, so it is intended for applications that benefit from slower shaft speed and stronger torque rather than fast output.
Can I run this with a VFD?
Yes — this ratio works well with a VFD where you need adjustable process speed, smoother startup, and more control under load.
Configuration Notes
- Input flange note: the 100-112B14 interface allows pairing with larger IEC B14 motors while keeping the installation shorter than an equivalent B5 arrangement.
- Output bore note: this build uses the standard 35mm bore. A 30mm BA72 bore is available as a non-standard option if a smaller shaft size is required.
- Application example: larger conveying systems, packaging machinery, and OEM equipment where a larger compact B14 motor arrangement is needed.
Typical Applications
- Conveyor and transfer drive systems
- Packaging and process handling equipment
- Automated production and assembly lines
- Light materials handling equipment
- Rotary equipment and general machinery drives
- OEM machine and equipment builds
Need help selecting the correct ratio, bore size, or motor input?
Contact our gearbox specialists for sizing assistance, torque verification, and availability confirmation.
Reviews
There are no reviews yet.