Overview
Configured for a 100-112B5 motor input, this BA72 bevel helical gearbox offers dependable 90° transmission together with the standard 35mm hollow output bore for common industrial shafting.
Reduction profile: With a 27.45:1 ratio, this BA72 configuration moves toward the slower end of medium reduction, helping machines gain firmer speed control and higher usable torque in continuous-duty service.
For plant layouts using larger B5 motor flanges as standard, this combination gives straightforward integration without changing the usual 35mm output connection.
The BA72 bevel-helical design is intended for smooth torque transfer, consistent running characteristics, and dependable service life in conveyors, machinery lines, and general plant equipment.
Need the non-standard 30mm bore option?
If your application requires the non-standard 30mm output bore instead of this standard 35mm version, we can supply that configuration as well. View available BA72 options and request the non-standard bore version here: Motovario BA72 Gearbox.
Key Specifications
Regulations: No
Bevel Helical: PAM B
Size: A72
Housing Version: U-Universal
Output Shaft Version: C-Hollow Shaft
Ratio (i): 27.45:1
Input Dim: Ø250×28 (IEC 100-112 B5)
Output Shaft Dim: Ø35
Rotation Direction: Standard
ON-Oil Plugs: No Plugs (Standard)
Mounting Position: U
ON-Output Oil Seal: NBR-Nitrile
ON-Input Oil Seal: NBR-Nitrile
ON-Output Bearings: Ball Bearings
ON-Lubrication: Mineral SAE 85W-140
Paint: Ral 5010 Blue
Designed to IEC mounting and interface standards, this gearbox offers straightforward compatibility with IEC frame motors and dependable performance in direct-on-line or VFD-controlled drive systems.
Output Speed (4-Pole vs 2-Pole Motors)
Calculated nominal output speed using a standard IEC motor:
| Motor Type | Input Speed (rpm) | Estimated Output Speed (rpm) |
|---|---|---|
| 4-Pole | 1400 | ~51 rpm |
| 2-Pole | 2800 | ~102 rpm |
Need torque confirmation? Output torque depends on motor power (kW), gearbox efficiency, and service factor. Use our Gearbox Service Factor Calculator or contact us for verified torque figures.
Motor Input Chart (IEC Flange Details)
This gearbox is supplied with a 100-112B5 IEC motor input. Confirm flange compatibility below:
| Motor Input | IEC Standard | Input Dimensions |
|---|---|---|
| 100-112B5 | IEC 60072 / IEC 60034 (B5 flange) | Ø250 × 28 |
If you’re unsure whether your motor is B5 or B14, contact our technical team for compatibility confirmation.
Internal Links & Compatible Options
Same ratio, different motor input: jump to the BA72 27.45:1 variant you need (35mm bore).
Need a different ratio? Explore the closest BA72 35mm ratios around this version.
More BA72 options: Browse all Motovario BA72 gearbox ratios
Explore the full BA Series range: Motovario BA Series bevel gearboxes
Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator
Ratio Selection Tips
Best for: loaded conveyors, process handling equipment, and automation systems that need stronger torque with controlled output speed.
Selection tip: pick 27.45:1 when you want a clear step up in torque multiplication from the lower medium ratios without moving fully into the slower high-ratio end of the range.
FAQ
Will this ratio be too fast for my application?
This ratio is no longer in the quick-output category. It suits equipment that benefits from steadier motion and stronger torque, though it is still faster than the higher BA72 ratios used for slower duty.
Can I run this with a VFD?
Yes — using a VFD with 27.45:1 gives good flexibility for startup, process control, and trimming conveyor speed without sacrificing the stronger torque advantage of this ratio.
Configuration Notes
- Input flange note: the 100-112B5 motor input allows direct flange mounting for larger IEC motors where a more substantial B5 interface is preferred.
- Output bore note: this build uses the standard 35mm bore. A 30mm BA72 bore is available as a non-standard option if a smaller shaft size is required.
- Application example: main conveyor drives, process machinery, and OEM equipment where a larger direct-mount motor arrangement is required.
Typical Applications
- Suitable for production lines, processing equipment, automated handling systems, and general industrial machinery.
- Packaging and process handling equipment
- Automated production and assembly lines
- Light materials handling equipment
- Rotary equipment and general machinery drives
- OEM machine and equipment builds
Need help selecting the correct ratio, bore size, or motor input?
Contact our gearbox specialists for sizing assistance, torque verification, and availability confirmation.
Reviews
There are no reviews yet.