Motovario NMRV-P075 80:1 Worm Gearbox – 35mm Output Bore

Built for smooth and dependable mechanical speed reduction, this Motovario NMRV-P075 80:1 worm gearbox is ideal when you need very low output speed with maximum torque multiplication. Its 35mm output bore, modular IEC input arrangement and durable die-cast aluminium construction make it a practical choice for machinery builders and replacement projects.

---

Gearbox Overview

As a medium-duty Motovario worm reducer, the NMRV-P075 is commonly used in conveyors, packaging machinery, feeders, small mixers. The 80:1 setup gives very low output speed with maximum torque multiplication, making it a good fit for machines that need steady, controlled output from a compact gearbox body.

---

Why Choose This Configuration?

A 80:1 worm gearbox is typically chosen when the application needs very low output speed with maximum torque multiplication. Compared with lower ratios it trades output speed for more torque multiplication, while compared with higher ratios it retains a more practical shaft speed for general machinery.

---

Technical Details

Gearbox size: NMRV-P075
Gear ratio: 80:1
Output bore: 35mm hollow bore
Gearbox type: Worm gear reducer
Housing: Die-cast aluminium alloy housing
Finish: RAL 5010 blue epoxy-polyester coating
Lubrication: Supplied with synthetic ENI TELIUM VSF oil for life
Mounting positions: B3, B6, B7, B8, V5, V6
Recommended position: B3
Motor input options: 71B14 | 71B5 | 80B14 | 80B5 | 90B14 | 90B5 | 100-112B14 | 100-112B5
Typical applications: conveyors, packaging machinery, feeders, small mixers

---

Internal Links & Compatible Options

Same gearbox size, nearby ratios: jump to the NMRV-P075 ratio that best suits your output speed and torque requirements.

Same gearbox size, different output bores: jump to the NMRV-P075 80:1 bore size that best matches your shaft.

More Motovario worm gearboxes: Browse all NMRV-P075 gearboxes Browse all worm gearboxes

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What does a 80:1 worm gearbox do?

A 80:1 worm gearbox reduces motor speed and multiplies torque, giving slower and more controlled output for industrial machinery.

What is this NMRV-P075 gearbox commonly used for?

This gearbox is commonly used on conveyors, packaging machinery, feeders, small mixers, where compact right-angle transmission and dependable continuous-duty operation are important.

What mounting positions are available?

Motovario lists B3, B6, B7, B8, V5 and V6 mounting positions for these NMRV/NRV units, with B3 technically preferred for lower oil splash, better lubrication and less heating.

What lubricant is supplied as standard?

These units are supplied with synthetic ENI TELIUM VSF lubricant for life under standard conditions.

What material is the housing made from?

Sizes up to 110 use die-cast aluminium alloy housings, while sizes 130 and 150 use grey cast iron housings.