Amtecs 0.25kW 8 Pole Motor – 0.33HP 750rpm IEC 80B35 Foot & Flange Motor

The Amtecs 0.25kW 8 pole IE2 motor in IEC 80B35 format is built for industrial reliability where conveyors, indexing systems, slow-speed drive duties, and geared assemblies. This foot-and-flange mounted aluminium motor combines standard IEC mounting dimensions with efficient 3 phase performance.

---

Motor Overview

Because this product uses Foot & Flange Motor, it is especially well suited to applications where both flange location and foot support are useful. This 8 pole configuration is suited to applications that need very low motor speed and smooth running.

---

Why This Version?

This 0.25kW 8 pole Amtecs motor is intended for customers who need an IEC 80B35 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 200mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & flange motor motor
• Slow-speed industrial applications matched to 8 pole speed characteristics
• General 3 phase machinery including conveyors, indexing systems, slow-speed drive duties, and geared assemblies

---

Technical Details

• Rated power: 0.25kW
• Pole count: 8 pole
• Nominal speed: 750
• IEC mounting code: 80B35
• Mounting type: Foot & Flange Motor
• Shaft / flange detail: 19mm Shaft x 200mm Spigot
• Voltage: 380-420 / 220-240 V Y/Δ 50Hz
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Amtecs 0.25kW 8 Pole Motor mounting style you need.

Need a different motor power? Explore the closest motor sizes around 0.25kW.

More Amtecs motors: Browse all 0.25kW motors Browse all AMTECS electric motors

Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator

---

Frequently Asked Questions

What speed does a 8 pole motor run at?

A 8 pole electric motor operating on a 50Hz supply typically runs at around 750rpm, with the actual full-load speed usually around 680–720rpm due to motor slip.

What is this 0.25kW motor commonly used for?

This motor is commonly used on small conveyors, fans, pumps, geared assemblies, packaging equipment, and compact OEM machinery where very low running speed, reliable continuous-duty operation, and IEC interchangeability are important.

Why would I choose a B35 motor?

A B35 foot and flange motor is commonly chosen where the motor needs both a secure base-mounted position and a full flange interface to the driven equipment.

What should I check before replacing a 0.25kW motor?

When replacing a 0.25kW motor, check the frame size, pole count, B35 mounting arrangement, shaft dimensions, supply voltage, and the mechanical fit to the existing machine before ordering.

Can this motor run on an inverter drive?

Many industrial AC motors can operate with inverter drives (VFDs), but suitability depends on the exact application, duty cycle, cable length, and motor specification.

What does B35 mounting mean?

B35 combines foot mounting with a B5 flange, making it a practical choice where both base fixing and a full flange connection are required.