Tec 0.55kW 2 Pole Motor – 0.75HP 3000rpm IEC 71B34 Foot & C Face Motor

Designed for fans, blowers, saws, polishing equipment, and direct-drive machinery, the Tec 0.55kW 2 pole motor in 71B34 format gives you a standard IEC solution for everyday industrial applications. The combination of aluminium construction, TEFC protection, and IE2 efficiency makes it ideal for replacement and OEM use.

---

Motor Overview

This version is supplied in Foot & C Face Motor format so it can be installed on installations that benefit from both face registration and foot support. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.55kW 2 pole Tec motor is intended for customers who need an IEC 71B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 105mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.55kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 71B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 14mm Shaft x 105mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.55kW 2 Pole Motor mounting style you need (71 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.55kW in the same pole and mounting style.

More Tec motors: Browse all 0.55kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.55kW 2 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.55kW 2 pole IEC 71B34 motor is required.

What does the IEC 71B34 mounting arrangement mean?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Can this motor be used with a VFD or inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

How protected is an IP55 motor in normal industrial use?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.