Tec 0.55kW 2 Pole Motor – 0.75HP 3000rpm IEC 71B14 Face Motor

For replacement motor duties and new machinery builds, this Tec 0.55kW 2 pole motor offers a practical IEC 71B14 mounting solution with IP55 protection, TEFC construction, and IE2 efficiency.

---

Motor Overview

The face-mounted design makes this motor suitable for compact gearbox inputs and machinery where face mounting saves space. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.55kW 2 pole Tec motor is intended for customers who need an IEC 71B14 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 105mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard face motor motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.55kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 71B14
• Mounting type: Face Motor
• Shaft / flange detail: 14mm Shaft x 105mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.55kW 2 Pole Motor mounting style you need (71 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.55kW in the same pole and mounting style.

More Tec motors: Browse all 0.55kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

What applications suit a 0.55kW 2 pole motor?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.55kW 2 pole IEC 71B14 motor is required.

What does an IEC 71B14 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Can this motor be used with a VFD or inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

How protected is an IP55 motor in normal industrial use?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

The options below help you move to the same motor in a different mounting style or jump to nearby power sizes while keeping the same pole configuration and mounting type.