Tec 0.37kW 2 Pole Motor – 0.5HP 3000rpm IEC 71B35 Foot & Flange Motor

The Tec 0.37kW 2 pole IE2 motor in IEC 71B35 format is built for industrial reliability where fans, blowers, saws, polishing equipment, and direct-drive machinery. This foot-and-flange mounted aluminium motor combines standard IEC mounting dimensions with efficient 3 phase performance.

---

Motor Overview

Because this product uses Foot & Flange Motor, it is especially well suited to applications where both flange location and foot support are useful. This 2 pole configuration is typically chosen where higher shaft speed is required.

---

Why This Version?

This 0.37kW 2 pole Tec motor is intended for customers who need an IEC 71B35 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 160mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & flange motor motor
• High-speed industrial applications matched to 2 pole speed characteristics
• General 3 phase machinery including fans, blowers, saws, polishing equipment, and direct-drive machinery

---

Technical Details

• Rated power: 0.37kW
• Pole count: 2 pole
• Nominal speed: 3000
• IEC mounting code: 71B35
• Mounting type: Foot & Flange Motor
• Shaft / flange detail: 14mm Shaft x 160mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.37kW 2 Pole Motor mounting style you need (71 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.37kW in the same pole and mounting style.

More Tec motors: Browse all 0.37kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

Where is a 0.37kW 2 pole motor typically used?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.37kW 2 pole IEC 71B35 motor is required.

What does the IEC 71B35 mounting arrangement mean?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Is this motor suitable for inverter drive use?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.