Tec 0.25kW 8 Pole Motor – 0.33HP 750rpm IEC 80B34 Foot & C Face Motor

If you need a 0.25kW 8 pole 3 phase motor with IEC 80B34 mounting, this Tec unit is designed for dependable duty across conveyors, indexing systems, slow-speed drive duties, and geared assemblies. The aluminium construction helps keep handling practical while maintaining industrial durability.

---

Motor Overview

Because this product uses Foot & C Face Motor, it is especially well suited to installations that benefit from both face registration and foot support. This 8 pole configuration is suited to applications that need very low motor speed and smooth running.

---

Why This Version?

This 0.25kW 8 pole Tec motor is intended for customers who need an IEC 80B34 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (19mm Shaft x 120mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & c face motor motor
• Slow-speed industrial applications matched to 8 pole speed characteristics
• General 3 phase machinery including conveyors, indexing systems, slow-speed drive duties, and geared assemblies

---

Technical Details

• Rated power: 0.25kW
• Pole count: 8 pole
• Nominal speed: 750
• IEC mounting code: 80B34
• Mounting type: Foot & C Face Motor
• Shaft / flange detail: 19mm Shaft x 120mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.25kW 8 Pole Motor mounting style you need (80 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.25kW in the same pole and mounting style.

More Tec motors: Browse all 0.25kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

What applications suit a 0.25kW 8 pole motor?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.25kW 8 pole IEC 80B34 motor is required.

How do I interpret the IEC 80B34 mounting designation?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Will this motor work on an inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

Use the mounting links below if you need the same output in a different IEC mounting arrangement. The nearby power links keep the same motor style so comparison is easier.