Tec 0.25kW 4 Pole Motor – 0.33HP 1500rpm IEC 71B35 Foot & Flange Motor

For replacement motor duties and new machinery builds, this Tec 0.25kW 4 pole motor offers a practical IEC 71B35 mounting solution with IP55 protection, TEFC construction, and IE2 efficiency.

---

Motor Overview

The foot-and-flange mounted design makes this motor suitable for applications where both flange location and foot support are useful. This 4 pole configuration is widely used where balanced all-round speed and torque are needed.

---

Why This Version?

This 0.25kW 4 pole Tec motor is intended for customers who need an IEC 71B35 motor rather than a generic substitute. The published frame, mounting, and shaft/flange detail (14mm Shaft x 160mm Spigot) make it easier to match to replacement and OEM requirements.

---

Typical Applications

• Replacement motor duties where IEC interchangeability matters
• OEM installations requiring a standard foot & flange motor motor
• General-purpose medium-speed industrial applications matched to 4 pole speed characteristics
• General 3 phase machinery including conveyors, pumps, fans, gearboxes, and general plant machinery

---

Technical Details

• Rated power: 0.25kW
• Pole count: 4 pole
• Nominal speed: 1500
• IEC mounting code: 71B35
• Mounting type: Foot & Flange Motor
• Shaft / flange detail: 14mm Shaft x 160mm Spigot
• Voltage: 230/400V
• Protection: IP55 TEFC
• Efficiency: IE2
• Construction: Aluminium frame, continuous-duty industrial motor

---

Internal Links & Compatible Options

Same motor power, different mounting options: jump to the Tec 0.25kW 4 Pole Motor mounting style you need (71 Frame).

Need a different motor power? Explore the closest available motor sizes around 0.25kW in the same pole and mounting style.

More Tec motors: Browse all 0.25kW motors | Browse all TEC electric motors

---

Frequently Asked Questions

What kind of machinery is a 0.25kW 4 pole motor good for?

This depends on the machine duty, mounting style, speed requirement, and mechanical fit, but this product is typically chosen for installations where a 0.25kW 4 pole IEC 71B35 motor is required.

What does an IEC 71B35 motor mounting code refer to?

The IEC mounting code identifies the frame and mounting arrangement of the motor, helping you match it to the correct gearbox, pump, machine flange, or base mounting setup.

Will this motor work on an inverter drive?

Many industrial AC motors can operate with inverter drives, but final suitability depends on the application, duty cycle, and control requirements.

What does the IP55 rating tell me?

IP55 means the motor is protected against dust ingress and low-pressure water jets, making it suitable for most indoor industrial environments.

If you want the same motor in another mounting style, use the options below. If you need a nearby power size, the suggested alternatives keep the same pole count and mounting format.