Overview
B143 94.13:1 bevel helical gearbox with a 70mm hollow bore output and 100-112B5 IEC motor input for compact 90° right-angle drive integration.
Optimised for industrial reliability, it delivers stable speed reduction and consistent torque transfer for everyday plant and OEM applications.
Very high reduction: At 94.13:1 very high reduction you achieve maximum torque multiplication and very slow output speed for high-load, low-speed industrial duty.
This configuration includes a 70mm hollow output bore and a 100-112B5, providing dependable speed reduction and consistent torque delivery for conveyors, automation lines, packaging machinery, and OEM equipment builds.
With its larger 100–112B5 flange input, this version is intended for bigger IEC frame motors, offering higher input capacity and wider motor compatibility while maintaining a compact 90° installation footprint and proven heavy-duty reliability.
As part of the modular Motovario B143 bevel helical gearbox range, this unit supports multiple mounting orientations, straightforward IEC motor fitment, and dependable long-term performance for continuous industrial service.
Need the non standard 65mm bore option?
If you need an output bore other than the standard 70mm, alternative configurations may be available subject to supply. View the B143 range and request your required bore option here: Motovario B143 Gearbox.
Key Specifications
- Series: B Series – Bevel Helical Gearboxes
- Model: B143
- Reduction Ratio: 94.13:1
- Output Bore: 70mm Hollow Bore
- Motor Input: 100-112B5 IEC Flange
- Housing Material: High-strength cast iron
- Gear Type: Spiral bevel + hardened helical stage
- Mounting Positions: B3 Mount
- Duty Rating: Suitable for continuous industrial operation (S1)
Manufactured with hardened, precision-ground gear geometry to improve efficiency and help minimise heat build-up under continuous load.
Output Speed (4-Pole vs 2-Pole Motors)
Calculated nominal output speed using a standard IEC motor:
| Motor Type | Input Speed (rpm) | Estimated Output Speed (rpm) |
|---|---|---|
| 4-Pole | 1400 | ~15 rpm |
| 2-Pole | 2800 | ~30 rpm |
Need torque confirmation? Output torque depends on motor power (kW), gearbox efficiency, and service factor. Use our Gearbox Service Factor Calculator or contact us for verified torque figures.
Motor Input Chart (IEC Flange Details)
This gearbox is supplied with a 100-112B5 IEC motor input. Confirm flange compatibility below:
| Motor Input | IEC Standard | Input Dimensions |
|---|---|---|
| 100-112B5 | IEC 60072 / IEC 60034 (B5 flange) | Ø250 x 28 |
If you’re unsure whether your motor is B5 or B14, contact our technical team and we’ll confirm compatibility.
Internal Links & Compatible Options
Same ratio, different motor input: jump to the B143 94.13:1 variant you need (70mm bore).
Need a different ratio? Explore the closest B143 70mm bore ratios above and below this version.
More B143 options: Browse all Motovario B143 gearbox ratios
Explore the full B Series range: Motovario B Series bevel gearboxes
Helpful calculators:
Gearbox Ratio & Speed Calculator |
Output Torque Calculator
Performance & Design Features
✔ Compact 90° right-angle bevel layout for space-efficient installations
✔ Precision-cut spiral bevel gearing for quiet running and efficient power transfer
✔ Hardened helical stage supports smooth torque transmission and long service life
✔ Heavy-duty bearing design to cope with high radial and axial shaft loading
✔ Well suited to VFD-driven motors for variable-speed process control
✔ Robust cast iron housing built for OEM machinery and continuous industrial operation
Ratio Selection Tips
- Best for: high-load drives where pulling power is critical — suited to bulk handling, screw conveyors, and continuous-duty machinery.
- Selection tip: for heavy loads, choose high ratios to increase mechanical advantage; check service factor and starting torque to avoid shock loading.
FAQ
Will this ratio be too slow?
If you need faster output speed, choose a low or mid reduction ratio. High ratios are used when torque and load capacity matter most.
Can I run this with a VFD?
Yes — a VFD is ideal for accurate speed control. For long periods at very low motor speeds, ensure adequate motor cooling if running at reduced frequency.
Configuration Notes
- Input flange note: the 100–112B5 IEC input suits larger IEC motors, increasing input capacity and expanding motor compatibility for heavier-duty applications.
- Output bore note: the 70mm hollow bore supports larger shaft interfaces and higher loading, providing a rigid, secure connection for torque transmission.
- Application example: screw conveyor or process feed system needing strong torque at reduced rpm
Typical Applications
- Heavier conveyor drives (bulk handling, incline conveyors)
- Screw conveyors and auger feed systems
- Process machinery requiring higher torque at reduced output speed
- Materials handling drives with higher inertia loads
- Industrial machinery with frequent starts/stops under load
- Robust OEM builds needing torque-focused right-angle transmission
Need help selecting the correct ratio, bore size, or motor input?
Contact our gearbox specialists for sizing support, torque checks, and availability confirmation.
Reviews
There are no reviews yet.